the converter is a using pulse width modulation (PWM), non isolation type switch stable voltage power supply, the input voltage 12V to 36V output, using imported high power integrated switching regulator module as the core, the unstable of 10 - 16V DC power converter for stable 36V DC power output. With high conversion efficiency, stable performance and other characteristics, input voltage, output current, over temperature, output short circuit and other automatic protection function, and the recovery of normal work after the fault elimination. Especially suitable for car audio, LCD TV, radio, monitoring system and mechanical equipment, etc..
Main performance parameters: Input voltage: DC16V - DC10V Output voltage: DC36V + 5% Output current: 12.5A Working temperature: -20 degrees C - +55 Conversion efficiency: >90% Rated power: 500W Peak power: 800W (MAX) Quiescent current: <100mA Size: long 140MM, wide 87MM, high 52MM
Note: the installation of the positive / negative polarity, to avoid the output side of the short circuit (otherwise burn the fuse ) Use requirements: Working environment temperature: -10 to +70 The input of the wire cross section is 2.5mm2 The output end of the wire cross section is 2.5mm2 Good ventilation converter must be installed in the car, no flammable substances, not water. Input and output power polarity direction shall not be connected to the wrong, not arbitrarily large, small fuse.
there are othere spec. of 12 TO 36V DC-DC as follows
12 v to 36v,16a,600w
other similar products
DC -DC Boost converter Spec. is as follows
12v to 24v,5A 12V TO 48V,2A 24V TO 48V,10A
12V to 24v,10A 12V TO48 V,5A 24V TO 48V,20A
12V to 24V,15A 12V TO 48V,10A 24V TO 48V,30A
12V TO 24V,20A 12V TO 36V 10A
12V TO 24V,25A 12V TO 36A 5A
12V TO 24V,30A
DC Boost Power Series
Product Description:This product is a pulse width modulation (PWM) mode, the non-isolated power supply, the input voltage is converted into a stable Output voltage, a high conversion
, stable performance characteristics, are widely used in the automotive industry ,
new energy, industry and other fields.
The main parameters:
1,Do not short the output, check the wiring is correct before power
Installation environment must be kept dry, keep the air circulating coolin